Table of Contents
Advertisement
Setting the Input Range and Alarm on Measurement Channels
38
Selecting the Input Type
5.
Press the
key to select Scale, and press the
settings, see "Explanation" on page 39).
Mode=Scale
Scales and records the
6.
Press the
key to select Volt and then press the
Type=Volt
DC Voltage
7.
Press the
key to select 20V and then press the
Range=20V
20mV-50V
Setting Span Left
8.
Set Span left to 0.00, and press the
Press the
value.
Span left=
-20.00/
Setting Span Right
9.
Likewise, set Span right to 10.00, and press the
Span right=
-20.00/
Setting the Decimal Position and Scale Left
10.
Display Scale left.
Scale left=
-200.00/ 300.00
11.
Press the
Scale left=
-200.00/ 300.00
12.
Press the
key to select space and then press the
to 0.0).
Scale left=
-200.00/ 300.00
Setting Scale Right
13.
Likewise, set Scale right to 400.0, and press the
Scale right=
-2000.0/ 3000.0
The Setting complete screen is displayed. When this screen is displayed, the
settings entered up to then are applied.
Finishing the Settings
14.
When the Setting complete screen is displayed, press the ESC key.
The Set=Range screen is displayed.
04-04 Channel
Setting complete
Setting the Unit and Finishing the Unit Settings
See steps 13 to 16 in Setup Example (2).
15.
Hold down the
* When the
key or
reversed as when the respective key is pressed by itself.
key to select the desired digit. Press the
0.00
20.00V
10.00
20.00V
0.00
key to select the desired digit.
0.00
0.0
400.0
key for 3 seconds to return to Operation mode.
MENU
key is pressed while holding down the SHIFT key, the operation is
key (for the selectable
key.
key.
key.
key to select the
Displays the range of span left.
key.
Displays the range of span right.
Displays the scaling range.
key (Scale left is set
key.
Set=Range
Input range and record
IM 04P02B01-02E
Advertisement
Table of Contents
