Table of Contents
Advertisement
Changing the Settings
Using the ESC Key
Entering Values
Entering Characters
IM 04P02B01-02E
Note
The comment line shows useful information such as a description of the setup item and the
range of selectable values. Read the comment and change the items as necessary.
The selected item change each time you press the
change in reverse order if you press the
(
) key.
FEED
SHIFT key +
key
Skip
Volt
Mode=TC
RTD
1-5V
key
This manual denotes the operation of pressing a key while holding down the SHIFT
(
) key as SHIFT + the other key (for example: SHIFT +
FEED
After you make a selection, press the
When the Setting complete screen is displayed, the changed item is applied.
01-01 Channel
Setting complete
If you press the ESC (
higher level menu. In other words, if you do not show the Setting complete screen, the
changes you made up to that point are discarded.
Press the ESC (
MENU
1
comment that is displayed at the bottom half of the screen.
Press the
(
FUNC
(
) to move the cursor to the left.
FUNC
Press the
(
) key to increment the value. Press the SHIFT (
DISP
key to decrement the value.
You repeat these steps to enter the value.
Span left= -2.000
-2.000/ 2.000V
When you press the
displayed.
Press the
(
FUNC
(
) to move the cursor to the left.
FUNC
Unit=ppm
CHR:a-z
Common Operations and Menu Structure
Possible choices
(
CH UP
) key, the operation is cancelled, and the display returns to a
MENU
1
) key while holding down the SHIFT (
) key to move the cursor to the right. Press the SHIFT (
SHIFT key +
key
Cursor
(
) key, the change is applied and the next screen is
CH UP
) key to move the cursor to the right. Press the SHIFT (
SHIFT key +
key
Cursor
(
) key. The selected item
DISP
(
) while holding down the SHIFT
DISP
key).
) key. The next screen appears.
) key to show or hide the
FEED
FEED
8
key
7
6
Span left= -1.500
-2.000/ 2.000
4
3
2
key
) +
FEED
) +
(
)
DISP
key
SHIFT key +
key
) +
FEED
23
Advertisement
Table of Contents
