Options - Fortinet FortiWiFi FortiWiFi-60 Administration Manual
Antivirus firewalls
Hide thumbs
Also See for FortiWiFi FortiWiFi-60:
- Installation and configuration manual (76 pages) ,
- Quick start manual (2 pages) ,
- Administration manual (458 pages)
Table of Contents
Advertisement
Options
Options
88
Automatically
adjust clock for
daylight saving
changes
Set Time
Synchronize with
NTP Server
Server
Syn Interval
To manually set the FortiWiFi date and time
1
Go to System > Config > Time.
2
Select Refresh to display the current FortiWiFi system date and time.
3
Select your Time Zone from the list.
4
Optionally, select Automatically adjust clock for daylight saving changes check box.
5
Select Set Time and set the FortiWiFi system date and time.
6
Set the hour, minute, second, month, day, and year as required.
7
Select Apply.
To use NTP to set the FortiWiFi date and time
1
Go to System > Config > Time.
2
Select Synchronize with NTP Server to configure the FortiWiFi unit to use NTP to
automatically set the system time and date.
3
Enter the IP address or domain name of the NTP server that the FortiWiFi unit can
use to set its time and date.
4
Specify how often the FortiWiFi unit should synchronize its time with the NTP server.
5
Select Apply.
Go to System > Config > Options to set the following options:
•
Timeout settings including the idle timeout and authentication timeout
•
The language displayed by the web-based manager
•
Dead gateway detection interval and failover detection
Select the Automatically adjust clock for daylight saving changes check
box if you want the FortiWiFi system clock to be adjusted automatically
when your time zone changes to daylight saving time and back to
standard time.
Select Set Time to set the FortiWiFi system date and time to the correct
date and time.
Select Synchronize with NTP Server to configure the FortiWiFi unit to use
NTP to automatically set the system date and time. For more information
about NTP and to find the IP address of an NTP server that you can use,
see http://www.ntp.org.
Enter the IP address or domain name of the NTP server that the
FortiWiFi unit can use to set its time and date.
Specify how often the FortiWiFi unit should synchronize its time with the
NTP server. A typical Syn Interval would be 1440 minutes for the
FortiWiFi unit to synchronize its time once a day.
01-28006-0014-20041105
System config
Fortinet Inc.
Advertisement
Table of Contents
