Fortinet FortiWiFi FortiWiFi-60 Administration Manual page 136
Antivirus firewalls
Hide thumbs
Also See for FortiWiFi FortiWiFi-60:
- Installation and configuration manual (76 pages) ,
- Quick start manual (2 pages) ,
- Administration manual (458 pages)
Table of Contents
Advertisement
Shutdown
136
To shut down the system
You can restart the FortiWiFi unit after shutdown only by turning the power off and
then on.
1
Go to System > Maintenance > Shutdown.
2
Select Shutdown.
3
Select Apply.
The FortiWiFi unit shuts down and all traffic flow stops.
To reset the FortiWiFi unit to factory defaults
Use the following procedure to reset system settings to the values set at the factory.
This procedure does not change the firmware version or the antivirus or attack
definitions.
Caution: This procedure deletes all changes that you have made to the FortiWiFi configuration
and reverts the system to its original configuration, including resetting interface addresses.
1
Go to System > Maintenance > Shutdown.
2
Select Reset to factory default.
3
Select Apply.
The FortiWiFi unit restarts with the configuration that it had when it was first powered
on.
4
Reconnect to the web-based manager and review the system configuration to confirm
that it has been reset to the default settings.
01-28006-0014-20041105
System maintenance
Fortinet Inc.
Advertisement
Table of Contents
