Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Fortinet FortiWeb 1000F
Summary of Contents for Fortinet FortiWeb 1000F
- Page 1 QuickStart Guide QuickStart Guide FortiWeb 1000F FWB-1000F...
-
Page 2: Before You Begin
Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet’s internal lab tests. -
Page 3: Package Contents
Access our knowledge base, forums, videos and technical experts at https://www.fortinet.com/support/support-services/forticare-support 1x Ethernet Cable 1x Console Cable (USB to RJ45) Thank you for choosing Fortinet 4x Rubber Feet 2x Sliding Rails 2x HDD Keys Bracket Kit (2x Handles, 4x Screws) -
Page 4: Setup Options
Data bits: Stop bits: Parity: None Flow Control: None Ethernet Port Console Port Management Computer Management Computer Console Cable Ethernet Cable Note: For static IP configuration, use 192.168.1.1 with subnet mask Note: For a detailed CLI guide, visit docs.fortinet.com 255.255.255.0... -
Page 5: Rack Installation
• A lifting device or additional support • ESD antistatic gear Lock Out Tab Support For video support on installing these slide rails, please visit: https://video.fortinet.com Outer Rails Inner Rails For additional support, please visit: https://support.fortinet.com Release Tab Locking Keyhole... - Page 6 Attach the Inner Rails to the Appliance Attach the Outer Rails to the Rack 1. Detach the inner rail from the rail assembly by pressing the lock out tab Front Outer Rail 2. Place an inner rail against a side of the appliance 1.
- Page 7 Front - FWB-1000F Note: Shielded Ethernet Cable Recommended PWR LED System Reset button Ports 9 to 12 (SFP) Green: Device is on (Top right position) Green: Link established, no activity LINK/ACT Off: Device is off LINK/ Flashing Green: Data activity Port 9 Port 10 Off: No link established...
- Page 8 Rear - FWB-1000F Power Switch Device On/Off System Reset Button Redundant Hot-Swappable Power Supplies 100-240V AC, 5-2.5A, 50-60Hz Green: Power supply operating normally Flashing Green: AC detected, operating in standby mode Red: Power supply failure Flashing Red: AC not detected, secondary PSU operating normally (if installed) Flashing Red/Green: Power supply warning event detected Off: Power supply is off...
- Page 9 The presence conditions of the restricted substance (BSMI RoHS table) are available at the link below: 本電池如果更換不正確會有爆炸的危險 限用物質含有情況表 (RoHS Table) 請到以下 網址下載： 請依製造商說明書處理用過之電池 https://www.fortinet.com/bsmi CAUTION: Shock Hazard. Disconnect all power sources. 警告： 為避免電磁干擾，本產品不應安裝或使用於住宅環境。 ATTENTION: Risque d’électrocution. Débranchez toutes les sources d’alimentation.
- Page 11 Fortinet.com...
Need help?
Do you have a question about the FortiWeb 1000F and is the answer not in the manual?
Questions and answers