Fortinet FortiWiFi FortiWiFi-60 Administration Manual page 301
Antivirus firewalls
Hide thumbs
Also See for FortiWiFi FortiWiFi-60:
- Installation and configuration manual (76 pages) ,
- Quick start manual (2 pages) ,
- Administration manual (458 pages)
Table of Contents
Advertisement
IPS
FortiWiFi-60 Administration Guide
4
Select the Enable box to enable the signature or clear the Enable box to disable the
signature.
5
Select the Logging box to enable logging for this signature or clear the Logging box to
disable logging for this signature.
6
Select the Action for the FortiWiFi unit to take when traffic matches this signature.
(See
Table
26.)
7
Select OK.
To restore the recommended settings of a signature
1
Go to IPS > Signature > Predefined.
2
Select the blue triangle next to a signature group name to display the members of that
group.
3
Select the Reset icon for the signature you want to restore to recommended settings.
The Reset icon is displayed only if the settings for the signature have been changed
from recommended settings.
4
Select OK.
Configuring parameters for dissector signatures
The following predefined dissector signatures have configurable parameters.
•
http_decoder
•
im
•
p2p
•
rpc_decoder
•
tcp_reassembler
Figure 148:Example of dissector signature parameters: tcp_reassembler
Figure 149:Example of dissector signature parameters: p2p
01-28006-0014-20041105
Signature
301
Advertisement
Table of Contents
