Router Objects; Access List; New Access List - Fortinet FortiWiFi FortiWiFi-60 Administration Manual

Router objects

Router objects

Access list

New access list

160
3 Set Direction to In or Out.
4 Enter the offset number.
5 Select the interface to match for this offset list.
6 Check or clear the Enable check box to enable or disable this offset list.
7 Select OK.
Router objects are a set of tools used by routing protocols and features.
Access lists are filters used by FortiWiFi routing features.
Each rule in an access list consists of a prefix (IP address and netmask), the action to
take for this prefix (permit or deny), and whether to match the prefix exactly or to
match the prefix and any more specific prefix.
The FortiWiFi unit attempts to match a packet against the rules in an access list
starting at the top of the list. If it finds a match for the prefix it takes the action specified
for that prefix. If no match is found the default action is deny.
For an access list to take effect it must be called by another FortiWiFi routing feature
such as RIP or OSPF.
Figure 70: Access list
Create New
Name
Action
Prefix
Figure 71: Access list name configuration
Add a new access list name. An access list and a prefix list cannot have
the same name.
The access list name.
The action to take for the prefix in an access list entry.
The prefix in an access list entry.
The Delete, Add access-list entry, and Edit icons.
01-28006-0014-20041105
Router
Fortinet Inc.