Backup Config - Fortinet FortiWiFi FortiWiFi-60 Administration Manual

System status
10
FortiWiFi-60 Administration Guide
To revert to a previous firmware version using the web-based manager
1 Copy the firmware image file to the management computer.
2 Log into the FortiWiFi web-based manager.
Note: To use this procedure you must login using the admin administrator account, or an
administrator account that has system configuration read and write privileges.
3 Go to System > Status.
4 Under Unit Information > Firmware Version, select Update.
5 Type the path and filename of the firmware image file, or select Browse and locate the
file.
6 Select OK.
The FortiWiFi unit uploads the firmware image file, reverts to the old firmware version,
resets the configuration, restarts, and displays the FortiWiFi login. This process takes
a few minutes.
7 Log into the web-based manager.
8 Go to System > Status and check the Firmware Version to confirm that the firmware
is successfully installed.
9 Restore your configuration.
For information about restoring your configuration, see
page 121.
Update antivirus and attack definitions.
For information about antivirus and attack definitions, see
attack definitions" on page
Reverting to a previous firmware version using the CLI
This procedure reverts the FortiWiFi unit to its factory default configuration and
deletes IPS custom signatures, web content lists, email filtering lists, and changes to
replacement messages.
Before beginning this procedure you can:
• Back up the FortiWiFi unit system configuration using the command execute

backup config.

• Back up the IPS custom signatures using the command execute backup
ipsuserdefsig
• Back up web content and email filtering lists.
For information, see
If you are reverting to a previous FortiOS version (for example, reverting from FortiOS
v2.80 to FortiOS v2.50), you might not be able to restore your previous configuration
from the backup configuration file.
127.
"Backing up and Restoring" on page
01-28006-0014-20041105
Changing the FortiWiFi firmware
"Backup and restore" on
"To update antivirus and
122.
35