Wireless Mac Filter - Fortinet FortiWiFi FortiWiFi-60 Administration Manual
Antivirus firewalls
Hide thumbs
Also See for FortiWiFi FortiWiFi-60:
- Installation and configuration manual (76 pages) ,
- Quick start manual (2 pages) ,
- Administration manual (458 pages)
Table of Contents
Advertisement
System wireless
Wireless MAC Filter
FortiWiFi-60 Administration Guide
Go to System > Wireless > MAC Filter to allow or deny wireless access to users
based on their MAC address.
Figure 23: Wireless MAC Filter
MAC Filter
Select to enable the MAC Filter.
Access for PCs
Select whether unlisted MAC addresses are allowed or denied access.
not listed below
MAC Address
Enter a MAC address, select Allow or Deny as required, select Add.
Add button. Select to add MAC address to list.
Allow List
List of MAC addresses allowed access to the wireless network.
Deny List
List of MAC addresses denied access to the wireless network.
Arrow buttons. Use to move MAC addresses between lists.
Remove buttons. Use to remove selected MAC addresses from lists.
To configure the wireless MAC filter
1
Go to System > Wireless > MAC Filter.
2
Select the MAC Filter check box.
3
Select Allow or Deny for Access for PCs not listed below.
4
For each MAC address, enter the MAC address, select Allow or Deny, and then select
Add.
The MAC address is added to the Allow or Deny list as appropriate.
5
To move MAC addresses between lists, select the MAC address and then select the
appropriate arrow key.
6
To remove a MAC address from a list, select the MAC address and then select the
Remove button below the list.
7
Select Apply.
01-28006-0014-20041105
Wireless MAC Filter
77
Advertisement
Table of Contents
