Service Ftp - Fortinet FortiWiFi FortiWiFi-60 Administration Manual

Antivirus

service ftp

FortiWiFi-60 Administration Guide
Example
This example shows how to add antivirus scanning for HTTP traffic on ports 70, 90,
and 443. Adding more ports for scanning does not erase the default, port 80. Use the
unset command to remove all ports from the list.
config antivirus service http
set port 70
set port 90
set port 443
end
This example shows how to display the antivirus HTTP traffic settings.
get antivirus service http
This example shows how to display the configuration for antivirus HTTP traffic.
show antivirus service http
Use this command to configure how the FortiWiFi unit handles antivirus scanning of
large files, how the FortiWiFi unit handles the buffering and uploading of files to an
FTP server, and what ports the FortiWiFi unit virus scans for FTP traffic.
Note: This command has more keywords than are listed in this Guide. See the FortiGate CLI
Reference Guide for a complete list of commands and keywords.
Command syntax pattern
config antivirus service ftp
set <keyword> <variable>
end
config antivirus service ftp
unset <keyword>
end
get antivirus service [ftp]
show antivirus service [ftp]
Table 30: antivirus service ftp command keywords and variables
Keywords and variables
port <port_integer>
01-28006-0014-20041105
Description
Configure antivirus scanning on a
nonstandard port number or
multiple port numbers for FTP.
You can use ports from the range
1-65535. You can add up to 20
ports.
CLI configuration
Default Availability
21 All models.
321