Pptp; Setting Up A Pptp-Based Vpn - Fortinet FortiWiFi FortiWiFi-60 Administration Manual

VPN

PPTP

Setting up a PPTP-based VPN

FortiWiFi-60 Administration Guide
Figure 136:Static IP and dynamic DNS Monitor
Name
Remote gateway The IP address and UDP port of the remote gateway. For dynamic DNS
Timeout
Proxy ID Source The IP address range that VPN users of this tunnel can connect to.
Proxy ID
Destination
Bring down
tunnel icon
Bring up tunnel
icon
You can set up VPN connections between FortiWiFi units and remote Windows clients
using Point-to-Point Tunneling Protocol (PPTP).
Using PPTP, you can create a virtual private network (VPN) between a remote client
PC running Windows and your internal network behind a FortiWiFi unit. Because it is a
Windows standard, PPTP does not require third-party software on the client
computer. If your Internet Service Provider (ISP) supports PPTP connections through
its network, you can create a secure connection by making simple configuration
changes to the client computer and the FortiWiFi unit.
Note: PPTP VPNs are only supported in NAT/Route mode.
To create a PPTP VPN configuration
1 Add a user group to the FortiWiFi unit.
The PPTP clients must be authenticated before being allowed to start a VPN tunnel.
To enable authentication, you must add a user group to the FortiWiFi unit. Within the
user group, add a user name for each PPTP client. You can add users to the FortiWiFi
user database, to authentication servers (RADIUS or LDAP), or to both. See
and authentication" on page
2 Enable PPTP and specify a PPTP address range. See
a PPTP range" on page
The name of the tunnel.
tunnels, the IP address is updated dynamically.
The time before the next key exchange. The time is calculated by
subtracting the time elapsed since the last key exchange from the keylife.
The IP address range from which VPN users of this tunnel can connect.
Take down the selected VPN tunnel. The remote VPN peer may have to
reconnect to establish a new VPN session.
Establish the selected VPN tunnel.
239.
266.
01-28006-0014-20041105
"Enabling PPTP and specifying
PPTP
"Users
265