Configuring Protection Profiles - Fortinet FortiWiFi FortiWiFi-60 Administration Manual

Firewall

Configuring protection profiles

FortiWiFi-60 Administration Guide
The following options are available for content archive through the protection profile.
Archive content
meta-information
To add a protection profile
If the default protection profiles do not provide the settings you require, you can create
custom protection profiles.
1 Go to Firewall > Protection Profile.
2 Select Create New.
3 Enter a name for the profile.
4 Configure the protection profile options.
5 Select OK.
Note: If both Virus Scan and File Block are enabled, the FortiWiFi unit blocks files that match
enabled file patterns before they are scanned for viruses.
To delete a protection profile
1 Go to Firewall > Protection Profile.
2 Select the Delete icon beside the protection profile you want to delete.
3 Select OK.
To edit a protection profile
1 Go to Firewall > Protection Profile.
2 Select the Edit icon beside the protection profile you want to modify.
3 Modify the profile as required.
Note: To change the one-time schedule name you must delete the schedule and add it with a
new name.
4 Select OK.
To add a protection profile to a policy
You can enable protection profiles for firewall policies with action set to allow or
encrypt and with service set to ANY, HTTP, FTP, IMAP, POP3, SMTP, or a service
group that includes these services.
1 Go to Firewall > Policy.
2 Select a policy list to which you want to add a protection profile.
For example, to enable network protection for files downloaded from the web by
internal network users, select an internal to external policy list.
Enable or disable archiving content meta-information to a FortiLog
unit for each protocol. Content meta-information can include date
and time, source and destination information, request and response
size, and scan result. Content archive is only available if FortiLog is
enabled under Log&Report > Log Config > Log Settings.
01-28006-0014-20041105
Protection profile
233