Policy List - Fortinet FortiWiFi FortiWiFi-60 Administration Manual

Firewall

Policy list

FortiWiFi-60 Administration Guide
You can add, delete, edit, re-order, enable, and disable policies in the policy list.
Figure 83: Sample policy list
The policy list has the following icons and features.
Create new
ID
Source
Dest
Schedule
Service
Action
Enable
source -> destination (n) Policy list headings indicating the traffic to which the policy
Figure 84: Move to options
01-28006-0014-20041105
Select Create New to add a firewall policy.
The policy identifier. Policies are numbered in the order they are
added to the policy list.
The source address or address group to which the policy applies.
See "Address" on page 204.
The destination address or address group to which the policy
applies. "Address" on page
The schedule that controls when the policy should be active. See
"Schedule" on page 216.
The service to which the policy applies. See
page 208.
The response to make when the policy matches a connection
attempt.
Enable or disable the policy. Enabling the policy makes it
available for the firewall to match it to incoming connections.
applies. The list heading is in the format Source -> Destination (n)
where n is the number of policies in the list.
The Delete and Edit/View icons.
The Insert Policy before icon. Add a new policy above the
corresponding policy (the New Policy screen appears).
The Move to icon. Move the corresponding policy before or after
another policy in the list.
204.
"Service" on
Policy
197