Route-Map List Entry - Fortinet FortiWiFi FortiWiFi-60 Administration Manual

Router

Route-map list entry

FortiWiFi-60 Administration Guide
Figure 78: Route map entry configuration
Route-map entry
Action
Match:
Interface
Address
Next-hop
Metric
Route Type
Tag
Set:
Next-hop
Metric
Metric Type
Tag
To configure a route map entry
1 Go to Router > Router Objects > Route Map.
2 Select the Add route-map entry icon to add a new route map entry or select the edit
icon beside an existing route map entry to edit that entry.
3 Select Permit or Deny for the Action to take for this route map entry.
The route map name and the ID number of this route map entry.
Select Permit to permit routes that match this entry. Select Deny to deny
routes that match this entry.
The criteria to match.
Match a route with the selected destination interface.
Match a route if the destination address is included in the selected
access list or prefix list.
Match a route that has a next hop router address included in the selected
access list or prefix list.
Match a route with the specified metric. The metric can be a number from
1 to 16.
Match a route that has the external type set to 1 or 2.
Match a route that has the specified tag.
The set criteria.
Set the next hop router address for a matched route.
Set a metric value of 1 to 16 for a matched route.
Set a metric value of 1 to 16 for a matched route.
Set a tag value for a matched route.
01-28006-0014-20041105
Router objects
165