Table of Contents
Advertisement
VERSION 11/2015
OPERATING MANUAL
8.2.3
REGULAR MAINTENANCE WORK
1. Check the level of separating agent in the separating agent cup every day, and top
up if necessary.
2. Check and clean the product fi lter every day or as required.
3. Every shut down should be carried out as laid down in Chapter 8.1.3!
4. Check hoses, pipes, and couplings every day and replace if necessary.
If the pump has to be emptied for maintenance work, proceed according to
Chapter 8.2.5.
The service manual is available in German and English.
For order number see Chapter 1.3.
8.2.4
FILLING WITH SEPARATING AGENT
Piston pump dry run!
High wear/damage to the packings.
Paint or solvent can escape if the seals are dry.
Ensure that the separating fl uid tank is fi lled with suffi cient separating fl uid. Filling
level 1 cm; 0.4 inch under the tank edge.
Pour the supplied separating agent into the intended opening.
Filling level:
1 cm; 0.4 inch under the fi lling opening.
Separating agent:
See accessories.
Notice
Maximum permissible inclination of pump for moving,
transportation etc. after fi lling it with separating agent ± 30°.
The pump must be vertical during operation.
ORDER NUMBER DOC2333553
NOTICE
B_04110
45
Advertisement
Table of Contents
