Processible Working Materials - WAGNER EvoMotion 20-30 Operating Manual

VERSION 11/2015
OPERATING MANUAL
2.5

PROCESSIBLE WORKING MATERIALS

Application
Water-based products
Solvent-based products
Low viscosity (<40 sec. DIN No. 4)
Medium viscosity (40 to 60 sec. DIN No. 4)
High viscosity ( >60 sec. DIN No. 4)
UV - sensitive products
Shear sensitive products
Humidity sensitive products
Legend
recommended
Abrasive working materials and pigments!
Greater wear of parts carrying the product.
Do not use any grainy and abrasive working materials with large, sharp-edged
pigments.
Use the application-related model (fl ow rate/cycle, material packaging, valve seat,
etc.), as specifi ed in Chapter 5.5.
Check if the fl uids and solvents used are compatible with the pump construction
materials as indicated in Chapter 5.5.1.
Wear caused by abrasive working materials is not covered by the warranty.
ORDER NUMBER DOC2333553
limited suitability
NOTICE
less suitable
10