Table of Contents
Advertisement
VERSION 11/2015
OPERATING MANUAL
6
ASSEMBLY AND COMMISSIONING
6.1
TRAINING ASSEMBLY/COMMISSIONING STAFF
The assembly and commissioning staff must have the technical skills to safely
commission the device.
When assembling, commissioning and carrying out all work, read and follow the
operating manuals and safety regulations for the additionally required system
components.
A skilled person must check to ensure that the device is in a reliable state after it is installed
and before commissioning.
6.2
STORAGE AND INSTALLATION CONDITIONS
Until the point of assembly, the device must be stored in a dry location, free from vibrations
and with a minimum of dust. The device must be stored in closed rooms. For specifi cations
on temperatures and relative humidity, see Technical Data.
Long-term storage: Thoroughly clean the pump, if a long-term decommissioning is
planned. See Chapter "Cleaning". For recommissioning, proceed according to following
chapters.
6.3
TRANSPORTATION
The pump can be moved on a trolley or manually without lifting
equipment.
Inclined ground!
Risk of accidents if the device rolls away/falls.
ORDER NUMBER DOC2333553
WARNING
Position the trolley with the piston pump horizontally.
If the surface is inclined, position the feet of the trolley towards
the gradient.
Secure the trolley.
B_04065
27
Advertisement
Table of Contents
