Processible Working Materials - WAGNER ZIP52 Translation Of The Original Operating Manual

Operating manual Pneumatic double diaphragm pump ZIP52 - ZIP80
2 Using in accordance with the instructions
C) Non-conductive polypropylene versions
The pneumatic double diaphragm pump must be employed outside of explosion hazard
zones.
2.4 PROCESSIBLE WORKING MATERIALS
Fluid materials like paints and lacquers.
Application
Water-dilutable products
Solvent-based lacquers and paints
Two-component coating products
Emulsions
UV lacquers
Primers
Epoxy and polyurethane lacquers,
phenolic lacquers
Wax-based underside protection
Shear-sensitive lacquers
Signs and definitions:
NOTICE
Abrasive working materials and pigments!
Greater wear of product-wetted parts.
4 Use the application-oriented model (flow rate/cycle, product, valves, etc.) as
indicated in the Chapter Technical Data.
4 Check if the fluids and solvents being used are compatible with the pump
construction materials as indicated in the Chapter Materials of Paint-wetted Parts.
Wear caused by abrasive working materials is not covered by the warranty.
Typical applications
Application
Furniture industry
Kitchen manufacturers
Joinery
Window factories
Steel-processing industry
Construction of vehicles
Shipbuilding
Signs and definitions:
Order number DOC 2330426 | Edition 09/2021
ZIP80
↗
↗
↗
↗
↗
↗
↗
↘
↗
↗ recommended
→ limited suitability
↘
not suitable
ZIP80
↗
↗
↗
↗
↗
↗
↘
↗ recommended
→ limited suitability
↘ not suitable
ZIP52 ZIP52 PF
↗ ↗
↗ ↗
↗ ↗
↗ ↗
↗ ↗
↗ ↗
↗ ↗
↘ ↘
↗ ↗
ZIP52 ZIP52 PF
↗ ↗
↗ ↗
↗ ↗
↗ ↗
↗ ↗
↗ ↗
↘ ↘
9