Programming Chart And Description Of The Sub-Menu: Print Out Set-Up; Programming Chart And Description Of The Sub-Menu: Head Maintenance - Olivetti OFX 1200 Instruction Manual

PROGRAMMING CHART AND DESCRIPTION OF THE SUB-MENU: PRINT OUT SET-UP

a)
PRINT OUT: EXIT
START: Confirms selection of the sub-menu PRINT OUT SET-UP and moves down to the associated
parameters. Confirms a
< / > :
To select the value of a parameter by scrolling forward and backward through the values available.
Alternatively used to position the cursor on the characters that make up the value of a particular
parameter; in this latter case, once the position is reached you will be prompted to enter the
required value.
STOP: Interrupts the programming procedure and returns to the original operating mode display.
•
Selection of the "PRINTING" option starts the print out of the selected information.
DESCRIPTION:
a) Allows you to exit the function without printing and to pass to the next sub-menu.
Selects printing of the configuration parameter settings.
Selects printing of the numbers programmed under the one touch keys.
Selects printing of the numbers stored under the speed dial codes.
b) Indicates "Printing" which may be interrupted by pressing STOP.

PROGRAMMING CHART AND DESCRIPTION OF THE SUB-MENU: HEAD MAINTENANCE

a)
START: Confirms selection of the sub-menu HEAD MAINTENANCE and moves down to the associated
parameters. Confirms a parameter and the relative value and moves on to the next parameter.
< / > :
To select the value of a parameter by scrolling forward and backward through the values available.
Alternatively used to position the cursor on the characters that make up the value of a particular
parameter; in this latter case, once the position is reached you will be prompted to enter the
required value.
STOP: Interrupts the programming procedure and returns to the original operating mode display.
DESCRIPTION:
a) Allows you to select automatic cleaning of the print head.
Reference section: ROUTINE MAINTENANCE.
60
PRINT OUT SET-UP
PRINT SETTINGS
b)
parameter and the relative value and moves on to the next parameter.
HEAD MAINTENANCE
CLEANING: OFF
ò
PRINT: ONE TOUCH
ò
PRINTING
STOP
ò
CLEANING: ON
CONFIGURATION PARAMETERS
PRINT: SPEED DIAL