Table of Contents
Advertisement
HOW TO ERASE ALL INCOMING MESSAGES AND MEMOS
Once the messages have been played back, you can erase all incoming messages and memos at the
same time.
v
The TAD has received messages. All messages have been played buck.
The display shows the initial operating mode: automatic reception
1.
Press CANCEL.
The display prompts you to confirm the operation.
2.
Press CANCEL again.
The message LED goes off.
HOW TO FORWARD MESSAGES TO A REMOTE LOCATION
Once the TAD has been programmed to forward messages to a remote location, you will be called by your
TAD at the time and telephone number programmed on it.
When the telephone rings, lift the handset and you will hear the forwarding message recorded on the TAD,
for example "The purpose of this call is to inform you that there are new incoming messages".
You may then execute the command that enables you to listen to the messages from the remote location.
See How to control the TAD from a remote location.
THE TELEPHONE ANSWERING DEVICE
AUTOMATIC RX
20-02-95
09:22
DELETE OLD MSG?
CANCEL MSG
113
Advertisement
Table of Contents
