Programming Chart And Description Of The Sub-Menu: One Touch Dial - Olivetti OFX 1200 Instruction Manual

PROGRAMMING CHART AND DESCRIPTION OF THE SUB-MENU: ONE TOUCH DIAL

b)
c)
01: FAX NO.
d)
SPEED 9600
START: Confirms selection of the sub-menu and moves down to the associated parameters. Confirms a
parameter and the relative value and moves on to the next parameter.
< / > :
To select the value of a parameter by scrolling forward and backward through the values available.
Alternatively used to position the cursor on the characters that make up the value of a particular
parameter; in this latter case, once the position is reached you will be prompted to enter the
required value.
STOP: Interrupts the programming procedure and returns to the original operating mode display.
•
Access to the FAX NO. or TEL NO. parameter is automatic without pressing START.
DESCRIPTION:
a) Prompts for the number (from 01 to 10) of the one touch key you wish to program.
b) Allows you to enter the fax or telephone number to be stored under the previously selected one touch key.
c) Displays the flashing cursor to allow you to enter a number.
d) If you entered a fax number, you are now prompted for the transmission speed.
e) Attenuates interference on overseas calls.
f) Displays the flashing cursor to allow you to enter the name.
g) Lets you choose whether or not to program another one touch key.
Reference section: DIALLING.
58
ONE TOUCH DIAL
a)
TYPE ONE TOUCH
KEY: 01-10
FAX NO.
ò
ò
SPEED 4800
e)
OVERSEAS OFF
f)
01: NAME
g)
EDIT ANOTHER YES
ò
ò
TEL NO.
01: TEL NO.
ò
OVERSEAS ON
ò
ò
EDIT ANOTHER NO
CONFIGURATION PARAMETERS
ò