Power Supply Board Stand-By Battery Specifications; Power Supply Board Output Voltage Settings - Altronix Maximal Series Installation Manual

Altronix
Power Supply Board
Model:
Maximal3D
(Refer to Fig. 1a, pg. 7 for Switch
[SW1] location and position)
AL1012ULXB
Maximal5D
(Factory set at 12VDC)
AL1024ULXB2
Maximal7D
(Factory set at 24VDC)
*Note: Additional battery enclosure required (Figs. 5-7, pgs. 11-13).
Fig. 1
Maximal3D
Power Supply Board
Maximal3D/Maximal5D/Maximal7D Access Power Controllers (PTC)

Power Supply Board Stand-by Battery Specifications:

AL600ULXB

Power Supply Board Output Voltage Settings:

OFF - 24V
SW1
ON - 12V
20 Min.
Battery
of Backup
12VDC/40AH* N/A
24VDC/40AH* N/A
12VDC/12AH 9.0 amp
24VDC/12AH 7.7 amp
24VDC/65AH* N/A
4 hr. of Backup
5.0 amp
5.4 amp
Battery capacity for emergency
stand-by at least 20 min.
1.2 amp
7.7 amp
Fig. 1a
OFF - 24V
ON - 12V
24 hr. of
Backup
N/A
0.7 amp
N/A
200mA
1.2 amp
- 7 -