Table of Contents
Advertisement
SECTION 3 - MACHINE CONTROLS AND INDICATORS
Platform Control Station
(See Figure 3-5., Platform Control Indicator Panel)
1. Emergency Stop Switch
Depress the switch to stop all the functions of the
machine. The switch must be turned clockwise to
restore the machine's functions.
2. Footswitch
Must be depressed before any movement is
controlled. The controls are enabled for a period
of 5 seconds. If no functions are operated within
this period, the footswitch must be recycled.
3. Jib Function Control Switch
Pull the switch to raise the jib.
Push the switch to lower the jib.
4. Mast Function Control Switch
Pull the switch to raise the mast.
Push the switch to lower the mast.
5. Turntable Slewing Control Switch
Toggle the switch to the right to slew the turntable
to the right.
Toggle the switch to the left to slew the turntable to
the left.
6. Function Speed Control
When the knob is turned counter-clockwise to the
left (
), the movements (except the drive
movement) are performed at low speed. Turn the
knob clockwise to the right (
speed of the movements.
3-4
NOTE: The button must be actuated and held BEFORE the
)to increase the
– JLG Lift –
Figure 3-4. Platform Control Console
1. Emergency Stop Switch
2. Footswitch
3. Jib Function Control Switch
4. Mast Function Control Switch
5. Turntable Slewing Control Switch
6. Function Speed Control
7. Battery Discharge Indicator
8. Auxiliary Power Button
9. Drive Control Joystick
10. Drive Speed Selector Switch
11. Horn
12. Steering Control
13. Posi Track
7. Battery Discharge Indicator
As the battery discharges, the bar lit in (1) moves
from the right to the left (5 green bars followed by
3 orange bars).
At this point, the LED flashes indicating "energy
reserve" (70% discharged).
The 2 red LEDs most to the left flash indicating
"empty" (80% discharged). At this point, power is
cut-off. The battery must be recharged.
1 - Discharge Indicator
2 - Hourmeter
8. Auxiliary Power Button
Once the electrical power is cut due to excessive
battery discharge (80%), the Auxiliary Power
Button
can be pressed to use the remaining
battery charge to travel to the charging station.
controls are enabled and the desired movement is
controlled. An intermittent acoustic signal is
actuated when the button is actuated.
31210005
Advertisement
Table of Contents
