Shadow Menu - Videonics PowerScript PS4000S Instruction Manual

Videonics PowerScript
To create a drop shadow:
For more specific information about Opacity, see "Opacity" on page 60.
Note
Drop shadows increase object display time. For example, when you add a drop
shadow to a text object, it takes longer to display that object. You can use the pre-
rendering option (see "Pre-Rendering Pages" on page 108) to speed up page playback.
1 Select the object or objects you want to shadow, if not already selected.
If you are creating a drop shadow for a text object, you must select the individual char-
acters in the object and not the text object itself. See "Selecting and Editing Text" on
page 70. However, if you want to shadow all text in the object, you can select the
object then enter Ctrl+A to select all of the text.
2 Click the Shadow option on the MAIN MENU to display the SHADOW menu, or enter
Ctrl+F2.

SHADOW Menu

3
Select the Shadow On/Off option to make the object's shadow visible. Deselect to turn
the drop shadow off.
4
Specify the Shadow Offset values by entering values in the text boxes. The first value
determines the offset to the right or left of the object (positive values set the shadow to
the right—negative values set the shadow to the left). The second value controls offset
below or above the object (positive values set the shadow below the object—negative
values set the shadow above the object).
5 Specify the Shadow Opacity. Use the slider knob for approximate values—enter a per-
centage value in the text box for precise values.
When you want to assure that two or more objects have exactly the same shadow
attributes, enter the same values in the Shadow Opacity and/or Shadow Offset text
boxes.
Tip
If you want an object's shadow to appear to completely enclose the object, create an outline
for the object rather than using a shadow. See the following section.
Shadow On/Off
SHADOW
10 10
100
Creating Object Drop Shadows
Shadow Offset
%
Shadow Opacity
79