Table of Contents
Advertisement
Chapter 8
Establishing a Connection
With all of the necessary configuration steps complete, you can now establish the con-
nection between PowerScript and the computer.
To establish the connection:
154
2
When the SETUP menu appears, click the Serial (RS-232) Setup option to display this
menu.
SETUP: SERIAL Menu
SETUP: SERIAL
Serial (RS-232) Setup
BAUD RATE
PARITY
STOP BITS
DATA BITS: RECEIVE
DATA BITS: SEND
3
Select the Baud Rate, Parity, Stop Bits, Data Bits (Receive), and Data Bits (Send) options to
match the settings in your PPP software.
The Baud Rate setting you specify here must match the Port Speed you select in the
FreePPP Modem Configuration panel (shown on page 153).
4
Close the SETUP: SERIAL and SETUP menus to remove them from your screen.
Note
If you have not completed the configuration steps outlined in the previous sections,
you must do so before successfully establishing the connection.
1
Open the FreePPP software component.
2
Select the configuration you created in the earlier steps from the Connect to list. If you
named the connection "PowerScript," that is the one you should select.
3
Select the Modem Configuration you created earlier from the Using list. Here again, if
you named the configuration "PowerScript," that is the one you should select.
4800
9600
19.2
NO
ODD
EVEN
1
1-1/2
2
5
6
7
8
5
6
7
8
PowerScript Computer Connections
Hide quick links:
Advertisement
Table of Contents
