Serial (Rs-232) Setup; Internet Settings - Videonics PowerScript PS4000S Instruction Manual

Postscript graphics and character generator with timebase correction
Table of Contents

Advertisement

Chapter 9

Serial (RS-232) Setup

Options in the SETUP: SERIAL menu control communications between PowerScript and
a computer platform connected to the RS-232 connector on PowerScript's rear panel. The
options you specify in this menu must match their counterpart settings in the PPP soft-
ware.
Related Topics:

Internet Settings

Use the SETUP INTERNET menu to specify addresses for connecting to the Internet.
If you are using a simple PPP connection to a computer serial port, you don't need to
enter anything in the SETUP INTERNET menu.
IP Address, Subnet Mask, and Router/Gateway Address are required only if you are using an
Ethernet connection to the Internet. Check with your System Administrator for the
required addresses.
FTP Password (when used) must conform to DOS conventions. Check with your System
Administrator for details.
Related Topics:
186
SETUP: SERIAL
Serial (RS-232) Setup
BAUD RATE
4800
PARITY
NO
1
STOP BITS
DATA BITS: RECEIVE
5
DATA BITS: SEND
5
See "Serial Cable Connection" on page 149.
SETUP: INTERNET
Internet Settings
IP Address:
Subnet Mask:
Router/Gateway Address:
FTP Password:
See "PowerScript Computer Connections" on page 147.
9600
19.2
ODD
EVEN
1-1/2
2
6
7
8
6
7
8
199.100.012.5
255.255.255.0
149.040.800.2
PowerScript Reference

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerscript ps4000sc

Table of Contents