Videonics PowerScript PS4000S Instruction Manual page 49

Videonics PowerScript
You need to create two more text objects to complete the Opening page. Use what you've
learned up to this point to create the two text objects (Ctrl+T). Assign the following
attributes to these objects:
Use the object handles to position the two objects approximately as shown here.
Congratulations! You've just created your first PowerScript page. If it doesn't look exactly
like the one shown above, don't worry too much about it. However, you should have
been able to create all of the object attribute settings—including fill colors, shadows,
fonts, layer positioning, and so forth. If you had any trouble with these concepts, re-trace
your steps against the instructions so that you are sure you understand how to create and
modify objects.
20 Use the two text boxes to set Shadow Displacement to 4. Set Shadow Opacity to 100.
Select the Shadow On/Off option to display the shadow. Close the SHADOW menu.
Attribute Attribute Values
Font Style Heavenetica
Font Size 25
Justification Center
Fill Color White:
Hue=0
Saturation=0
Brightness=100
Opacity=100
Drop Shadow Displacement=2 pixels
Opacity=100
A
A
SIGHTnSOUND
SIGHTnSOUND
Presentation
Presentation
Menu
TEXT (Ctrl+F1)
TEXT (Ctrl+F1)
TEXT (Ctrl+F1)
FILL (Ctrl+F3)
SHADOW (Ctrl+F2)
Tip
For quick, easy alignment, select all three text objects, then
enter Ctrl+Alt+C to align them at their horizontal centers.
Adding the Remaining Objects
39