Outputs; Digital Control Networking; Video Performance; Timebase Corrector/Synchronizer - Videonics PowerScript PS4000S Instruction Manual

Postscript graphics and character generator with timebase correction
Table of Contents

Advertisement

Appendix E

Outputs

Y/C (S-Video) Program OUT
Composite Outputs (Program, Preview, and
Key)
REF (Sync) OUT
YUV IN (PS-1000SC/PAL Model only)
Y, R-Y, B-Y IN (PS-1000SC/NTSC Model only)

Digital Control Networking

RISC Processor
SERIAL IN
PC Card
Keyboard
Mouse
Control (GPI) IN

Video Performance

Digital Conversion
S/N Ratio Bandwidth

Timebase Corrector/Synchronizer

Full frame (two field) infinite-window, locks to REF IN if present, otherwise locks to Video IN. If neither is
present, generates RS-170A time base.
218
Y=1.0 Vp-p, C=0.30 Vp-p, 75-ohm, 4-pin mini-DIN
connectors
1.0 Vp-p, 75-ohm, BNC connectors
BNC loop-through from REF IN
BNC Connectors, 625 YUV levels
BNC Connectors, 525 Betacam and Panasonic MII levels
High-speed, Level 2 PostScript-compatible raster image processor
RS-232, 9-pin (DB-9) port for file upload and download using
computer equipped with data communication software. Supports
transfer of fonts, graphics, and titling screens.
Two standard PC card (PCMCIA) Type III slots, one on front panel,
one on rear. Both accept Type I, II, or III PC cards. Support for
Ethernet and flash-RAM. Ethernet connection supports file transfer
protocol (FTP using TCP/IP).
Front panel connector. Keytronics AT-style IBM-PC compatible.
Front panel connector. Serial two-button mouse. Microsoft mouse
compatible.
2 x BNC. Active-low.
4:2:2, 26-bit quantization (10 bit Y, 8-bit each U and V).
Over 60 dB. Bandwidth: 5.5 MHz
PowerScript Specifications

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerscript ps4000sc

Table of Contents