Table of Contents
Advertisement
Videonics PowerScript
Comb Filter—Activates (ON) or deactivates (OFF) PowerScript's Comb Filter. Normally, this
option should be ON. However, if the input video comes from a non-synchronized tape
source (such as a consumer VCR or camcorder) and sync quality is substandard, minor
horizontal bands of false color might appear. Turning OFF the Comb Filter might
improve quality. Otherwise, the Comb Filter should always be turned ON.
IN—Specify whether you are using PowerScript's Composite and Y/C connectors, or you
are using the Component connector on the Studio Component model.
Component In Levels—Select BETACAM if you are using a SONY Betacam input device, or
select MII if you are using a Panasonic device.
Component Out Levels—Same as above except the settings apply to your output devices.
Serial (RS-232) Setup
Use the Serial (RS-232) Setup options when you create a connection between PowerScript
and a computer platform using a serial cable. See "Serial Cable Connection" on page 149
for details.
Internet Settings
Use the Internet Settings option when you connect PowerScript to an Ethernet network.
See Chapter 8, PowerScript Computer Connections, for further information.
PC Card Maintenance
The PC Card Maintenance option provides a way to create a PowerScript Start Card and/or
erase a PC Card. See the following section for more information.
Serial (RS-232) Setup
125
Hide quick links:
Advertisement
Table of Contents
