Videonics PowerScript PS4000S Instruction Manual page 61

Videonics PowerScript
You have specified how long the page is to remain on the screen while playing (5 sec-
onds), specified a Transition IN and its duration (a smooth bouncing path for 2 seconds),
and specified a Transition OUT and its duration (a fade occurring over a two second
period).
5 Click the Set Transitions button at the bottom of the menu to display the TRANSISTION
EFFECTS menu, or enter Ctrl+Shift+F10.
TRANSITION EFFECTS
A B C
2 2
SECONDS
+
0 0
FRAMES
B B
CUT
B B
FADE
SELECT WIPE
B
SELECT SLIDE
PATH
SELECT
PLAY SAVE AUTO-SAVE
Use the column on the left to specify a Transition IN effect. Use the right column for the
Transition OUT effect. The two columns are identical with the exception of the Path option
for Transition IN effects.
6 Select the Path option in the left-hand column, then click the Select button to its imme-
diate left. The PATH menu appears showing the available path options.
7 Select the smooth bouncing path option (shown at left) then close the path menu.
8
Select the Fade option in the right-hand column (for the Transition OUT).
9
Set the Seconds and Frames text boxes to 2 and zero, respectively, for both the Transi-
tion IN and Transition OUT durations.
10 Enter Shift+Esc to close all open menus.
Lesson 8 Setting Page Duration and Transitions for the Opening Page
This menu gives you access to the more interesting
and creative transitions available with PowerScript.
This menu (like the TRANSITIONS menu above)
has Transition IN and Transition OUT text boxes.
These are merely duplicates of one another. If you
change the value or values in one menu, they also
SELECT
change automatically in the other menu.
SELECT
51