About Cables; Cable Types And Jacks - Videonics PowerScript PS4000S Instruction Manual

Videonics PowerScript
A C
BOUT ABLES
Cables typically carry the output signal from one device to the input of another device.
The signal can then be displayed or recorded on the second device. The types of cables
and jacks you might use with PowerScript include the following:

Cable Types and Jacks

Y/C (S-Video) Jack—The PowerScript jacks that accept an S-Video connector are labeled
Y/C.
RCA Cable—Most consumer-level electronics use RCA-type jacks and cables. Most jacks
on the PowerScript rear panel are BNC video jacks. To make a connection between an
RCA cable and the BNC video jacks on PowerScript, you need a BNC to RCA Adapter.
Y/C (S-Video) Jack
Y/C Plug BNC Plug
BNC Jacks
BNC to RCA Adapter
RCA Plug

About Cables

27