Studio Model Settings; Setup: Studio Menu - Videonics PowerScript PS4000S Instruction Manual

Chapter 7
If you ever have occasion to contact Videonics Technical Support for assistance, you
Advanced Settings
might be asked to access the Advanced Settings.

Studio Model Settings

To access this menu, click the Studio Model Settings button in the SETUP VIDEO menu
(described above).

SETUP: STUDIO Menu

Out Sync/Horizontal Phase—If you are using PowerScript's sync function and your output
signals lose synchronization, enter a value in the Horizontal Phase text box to adjust the
timing and restore synchronization.
Out Key/Key Delay—This option is similar to the one above except that it can be used to
adjust the signal phase being output through PowerScript's Key OUT connector.
124
• 0 IRE—Use this setting when you need to match PowerScript's output to equipment
that puts out 0 IRE black. Some equipment, especially consumer-level, puts out a
lower black level at 0 IRE.
• 7.5 IRE—Use this setting to have PowerScript output blacks at the broadcast stan-
dard of 7.5 IRE.
WARNING!
Never make changes to the Advanced Setting unless specifically asked to do
so by Videonics Technical Support.
SETUP: STUDIO
OUT
SYNC
OUT
KEY
COMB
ON
FILTER
COMPOSITE
IN
& Y/C
COMPONENT
BETACAM
IN LEVELS
COMPONENT
BETACAM
OUT LEVELS
HORIZONTAL PHASE
OUT vs. SYNC (pixels)
KEY DELAY
(0-63 pixels)
OFF
COMPONENT
MII
MII
Advanced PowerScript Functions
These options are
available only if you
have the PowerScript
Studio Component
model (PS-4000SC)