Videonics PowerScript
Configuring the PowerScript Serial Connection
The final step to configuring a serial connection is to use the PowerScript Setup function
to specify the correct baud rate, parity, and so forth.
To configure PowerScript over a serial connection:
8
When you return to the FreePPP Setup window, click the Modems tab, then click New to
enter the final configuration data.
9
Enter information into the FreePPP Modem Configuration panel to match the one
shown above. Even though you aren't using a modem for the connection, this informa-
tion is required for PowerScript to create the serial connection.
When you finish entering the information, click OK .
10 Quit the FreePPP application.
1
After starting PowerScript, display the MAIN MENU and click the Setup option, or enter
Ctrl+F6 .
Configuring the PowerScript Serial Connection
Modems Tab
153