Table of Contents
Advertisement
Videonics PowerScript
3
Select the TCP/IP settings for your network, then click Properties. The TCP/IP Properties
dialog box appears.
4
Write down (carefully) the information contained in the IP Address text box and set it
aside—you'll need it later. In the example shown above, the IP Address is
206.204.88.139—yours will probably be different.
5
Start PowerScript, enter Ctrl+Shift+F12 to display the SETUP menu, then click the Inter-
net Settings option to display the SETUP INTERNET menu.
Ctrl+Shift+F12
SETUP
GPI
START
6
Enter the IP Address you wrote down in the preceding steps into the IP Address text box
in the SETUP INTERNET menu. You must enter the same address as you copied from
your computer except that one to three of the last digits must be different. For example,
if the address you copied was something like 206.204.88.145, then enter an address
such as 206.204.88.175.
Write this address down
Time & Date Setup
GPI Options
Display Parameters
Video Parameters
Serial (RS-232) Setup
Internet Settings
PC Card Maintenance
File Maintenance
Direct Connection Configuration
SETUP: INTERNET
Internet Settings
IP Address:
199.100.012.5
Subnet Mask:
255.255.255.0
Router/Gateway Address:
149.040.800.2
FTP Password:
161
Hide quick links:
Advertisement
Table of Contents
