Stratasys Connex500/350 User Manual page 112

Using Objet Studio
5–76
The following operations are available on the Job Manager ribbon:
Group Icon Purpose
3D Client: Sets the server connection. See "Setting the Remote
Printer Printer Connection (Client Mode)" on page 75.
Server: Sets the printer connection. See "Setting the Printer
Connection" on page 72.
Configures options for printer alerts. See "Configuring User
Alerts" on page 78.
Queue Server: Moves a job to the head of the Jobs Queue.
Client: Disabled.
See "Jobs Queue" on page 71.
Server: Moves a job to a higher position in the Jobs Queue.
Client: Disabled.
See "Jobs Queue" on page 71.
Server: Moves a job to the bottom of the Jobs Queue.
Client: Disabled.
See "Jobs Queue" on page 71.
Server: Moves a job to a lower position in the Jobs Queue.
Client: Disabled.
See "Jobs Queue" on page 71.
Job Server:
•
For a job in the
beginning).
•
For a job in the
for printing.
Client: Disabled.
See "Restarting Jobs" on page 81.
Server: Stops a job in progress.
Client: Disabled.
Server: Continues printing the current job from the point
where printing stopped.
Client: Disabled.
See "Resuming Jobs" on page 81.
Removes the selected job from the queue.
Refreshes the image of the selected job in the Tray Preview
display.
Opens the Tray Settings screen and displays the tray. For
deleted jobs, this enables you to make changes before
printing.
—Prints it again (from the
Jobs Queue
list—Moves it to the
History Jobs Queue
DOC-13025 Rev. A