DOC-13025 Rev. A
To print calibration samples:
1. From the Options menu, select
•
(to calibrate heads for High Quality printing)
HQ Weight Test
•
(to calibrate heads for High Speed printing)
HS Weight Test
•
(to calibrate heads for Digital Material printing)
DM Weight Test
Figure 6-52: Printing print-head calibration samples
2. Set the printer to on‐line mode.
Figure 6-53: Printer in on-line mode
The printer prints eight calibration patches on the build tray.
To examine the calibration samples:
Use the Missing Nozzles Ruler to determine the number of clogged
("missing") nozzles the printed patches.
Clogged nozzles are seen in the samples as missing rows of printed
material. When you match the gap in the printed sample with a line on
the Missing Nozzles ruler, the number on the ruler next to the line
indicates the number of missing rows.
Connex500/350 User Guide
and one of the following:
Weight Test
6–39