Tadiran Telecom T207M/NP User Manual page 253

whenever the call is established. When activated during a call, Elapsed Time displays duration of the current
call.
The elapsed time is shown in HH:MM:SS format up to (13 hours) 12:59:59.
NOTE! The system may be programmed with a limit on the duration of your external calls. Once this limit
is reached, the call will be automatically disconnected.
From Idle:
•Press
screen, and next to
During a call:
•Press
Elapsed Time feature reverts to the state it was set to before the conversation started.
Headset Only. This feature is designed for users operating in Headset mode. When activated, the Headset
[Head]
Only feature causes calls to be conducted via the headset and disables the microphone and loudspeaker,
along with the features that use these devices (e.g. voice page). Calls are conducted via the headset, even if
the cradle switch is on-hook.
Press
[Head]
. See
[Head]
Setup
Coral Telephony Features
once to activate; press again to deactivate; a bullet is displayed next to
[fSet] [Elps]
that is displayed whilst on a call.
[Elps]
once to activate or deactivate the Elapsed Time display. When the conversation is over, the
[Elps]
to activate and deactivate the Headset Only feature; when activated, a bullet is displayed next to
Headset Only on page 129
.
241 T207M, T208M, T207M/NP, T208M/BL User Guide
on the Setup
[Elps]