Group Calls: Forced Release Of A Participant - Tadiran Telecom T207M/NP User Manual

Group Calls: Forced Release of a Participant

This feature allows an authorized user, from idle, to release a participant from an ongoing conference. The feature does not
allow the user to view the list of participants.
Releasing a single participant:
1. Press .
[GpCl] [RlsP]
2. Listen for the dial tone.
3. Dial the participant number or press the programmed DSS key.
4. Press - no confirmation tone will be heard.
[fRls]
5. Press to exit.
[Exit]
The group operator can also release a participant from an ongoing conference provided that the operator is authorized to
release Group Call participants in the COS.
Releasing a participant (Group Call Operator):
1. Press the preprogrammed
lit.
NOTE! See page 167
key, use feature code #1305.
2. Press the member's preprogrammed DSS key.
NOTE! You cannot manually dial the internal/public/private library number.
3. The member is disconnected from the conference.
The member's DSS key is extinguished at the Group Operator's station.
4. The member returns to
Station Telephony Features
Group Calls: Forced Release of a Participant
DSS key during an established conference; the corresponding DSS key is
RELEASE MEMBER
for instructions on how to program a DSS key. To program an RELEASE MEMBER
state.
Idle
127 T207M, T208M, T207M/NP, T208M/BL User Guide