Paging: Voice Paging - Tadiran Telecom T207M/NP User Manual

Paging: Voice Paging

This feature enables you to voice page another keyset (FlexSet, FlexSet-IP, DKT, T207M or T208M) from your phone.
Essentially this feature is an intercom allowing persons to converse between stations, or can be employed as a simple pager.
Press to access the Voice Page feature.
[VPg]
Voice Paging a single keyset station:
When Busy:
• Press upon reaching a busy keyset station to send a message to the other party that they are being paged.
[VPg]
When Unanswered:
• Press upon hearing the ringback tone at unanswered keyset station. The call will automatically connect.
[VPg]
From Idle:
1. Press .
[VPg]
2. Dial a keyset station number.
3. Listen for the Voice Page tone and begin speaking.
NOTE! When you hear reorder tone and DNT DIS VP message appears, the station is protected from
receiving voice page calls. (See
Station Telephony Features
Paging: Voice Paging
10:50
Page 1
→ Park
VOICE PAGE
Page 2
***** Enter Destination ****
Voice Page Receive
26 May 2007 Company xyz
user name station number
[VPg]
WPg
on page 240
161 T207M, T208M, T207M/NP, T208M/BL User Guide
SM
for configuration instructions.)