Lexicon RV-5 User Manual page 24

Basic Operation
MENU OPTIONS
Selecting a menu option opens another menu within the menu
structure. For example, selecting SETUP from the MAIN MENU opens
the SETUP menu.
S E T U P
M A I N M E N U
I N P U T S
M O D E A D J U S T
S P E A K E R S
A U D I O C O N T R O L S
I / O C O N F I G
T U N E R P R E S E T S
D I S P L AY S
S E T U P
V O L U ME C O N T R O L S
T R I G G E R
T U N E R S E T U P
L O C K O PT I O N S
L I V E ! C A L I B R AT I O N
P O W E R M A N A G E ME N T
PARAMETER DROP-DOWN MENUS
Selecting some menu options opens a drop-down menu that contains
a list of available parameter settings. For example, selecting the
CUSTOM NAME parameter from the DISPLAY SETUP menu opens a
drop-down menu which is used to select the ON or OFF setting.
D I S P L AY S E T U P
O N - S C R E E N D I S P L AY
F R O N T PA N E L D I S P L AY
A / V S Y N C D E L AY O F F
C U S T O M N A M E O F F
E D I T C U S T O M N A M E
To select a setting in a parameter drop-down menu:
1. When the drop-down menu opens, press the remote-control
and arrows to scroll upward and downward through the
complete list of available settings. The current setting is displayed
beneath the parameter name in the on-screen and front-panel
displays.
2-14
ON
OFF
2. When the desired setting appears beneath the parameter
name, press the arrow to accept the setting and close the
drop-down menu.
HORIZONTAL BAR GRAPHS
Selecting some menu parameters opens a horizontal bar graph. The
bar graph indicates the position at which the current parameter setting
falls within the entire parameter range.
For example, selecting the A/V SYNC DELAY parameter from the
DISPLAY SETUP menu opens the horizontal bar graph shown below,
which is used to adjust the amount of audio delay.
D I S P L AY S E T U P
O N - S C R E E N D I S P L AY
F R O N T PA N E L D I S P L AY
A / V S Y N C D E L AY O F F
A / V S Y N C D E L AY
C U S T O M N A M E C U S T O M N A M E O F F O F F
E D I T C U S T O M N A M E
To adjust a parameter setting with a horizontal bar graph:
1. When the horizontal bar graph appears, press the remote-control
and arrows to increase or decrease the setting in the desig-
nated increments. The setting appears to the right of the
parameter name in the on-screen and front-panel displays.
2. When the desired adjustments have been made, press the
arrow to select the setting and close the horizontal bar graph.
Note:
Menu item selection instructions differ for certain menus. These instances
are noted throughout this user guide.
OFF, 1 to 60ms
O F F
Lexicon