Lexicon RV-5 User Manual page 76

Setup
SETUP
MAIN MENU
INPUTS
MODE ADJUST
SPEAKERS
AUDIO CONTROLS
I/O CONFIG
TUNER PRESETS
DISPLAYS
SETUP
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
LIVE! CALIBRATION
POWER MANAGEMENT
SUBWOOFER
FULL, 30 TO 120 Hz, THX 80Hz, NONE
SETUP SPEAKERS SET CROSSOVERS
Assigns a crossover point for the Main Zone audio output connector
labeled Subwoofer. When set to FULL, the RV-5 sends a full-range
audio output signal to this connector. Otherwise, the RV-5 activates a
crossover point at the selected setting. Choose the setting equal to
the lowest setting of the other speakers.
3-32
SPEAKER SETUP
SET CROSSOVERS
CHECK MICROPHONES
AUTOMATIC
MANUAL
SET CROSSOVERS
BEFORE CALIBRATING
THX SETUP SUBWOOFER
CROSSOVER SETUP
CUSTOM SETUP
CUSTOM SETUP
FRONT L/R
THX SETUP
CENTER
SIDE L/R
REAR L/R
SUBWOOFER
R SR RR
ULTRA2 SUB
40Hz 60Hz 60Hz
BGC
C
ASA
60Hz
M
L SL RL
SUB
40Hz 40Hz 60Hz 60Hz
Note:
When the SUBWOOFER parameter is set to NONE, subwoofer signals
will not be redirected if the 5.1a BYPASS listening mode is activated. To
redirect subwoofer signals, configure the speaker setup with the
associated DVD-A/SACD player.SETUP
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
INPUTS
Lexicon
S U B WO O F E R
40Hz FULL
3 0 Hz
60Hz
4 0 Hz
60Hz
5 0 Hz
60Hz
40Hz 6 0 Hz
OFF 7 0 Hz
N/A 80Hz
APART THX 8 0 Hz
90Hz
1 0 0 Hz
1 1 0 Hz
1 2 0 Hz
NONE