Lexicon RV-5 User Manual page 99

RV-5
PERFORMING MANUAL OUTPUT LEVEL CALIBRATION
SETUP SPEAKERS MANUAL
Selecting the MANUAL SPEAKER SETUP menu LEVELS CALIBRATION option displays the LEVELS CALIBRATION menu shown below, to manually
calibrate output levels.
SETUP
MAIN MENU
INPUTS
MODE ADJUST
SPEAKERS
AUDIO CONTROLS
I/O CONFIG
TUNER PRESETS
DISPLAYS
SETUP
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
LIVE! CALIBRATION
POWER MANAGEMENT
Note the following:
• Use a Sound Pressure Level (SPL) meter to manually calibrate
output levels. A SPL meter is a device that measures the relative
loudness of the speakers to ensure accurate output level
calibration. SPL meters are available from electronic retailers
such as Radio Shack.
• Output levels should be calibrated from the primary listening
position, placing the SPL meter at the approximate location
where the listener's head will be during listening.
LEVELS CALIBRATION
SPEAKER SETUP
SET CROSSOVERS
CHECK MICROPHONES
AUTOMATIC
MANUAL
SET CROSSOVERS
BEFORE CALIBRATING
LEVELS CALIBRATION
MANUAL SPEAKER SETUP CUSTOM SETUP
SPEAKER DISTANCES INTERNAL NOISE TEST
LEVELS CALIBRATION EXTERNAL NOISE TEST
BASS PEAK LIMITERS
R SR RR
0.0dB 0.0dB 0.0dB
INTERNAL NOISE
C
!CAUTION!
0.0dB
HIGH AUDIO LEVELS
M
L SL RL
SUB
0.0dB 0.0dB 0.0dB 0.0dB
• Output levels for speakers that are not included in the speaker
setup cannot be adjusted during the internal noise test. These
output levels can be adjusted during the external noise test, but
there is no need to do so.
Setup
CUSTOM SETUP SPEAKER LEVEL ADJUST
FRONT LEFT +0.0dB
CENTER +0.0dB
FRONT RIGHT +0.0dB
SIDE RIGHT +0.0dB
REAR RIGHT +0.0dB
REAR LEFT +0.0dB
SIDE LEFT +0.0dB
SUBWOOFER +0.0dB
-18.0 to +12.0dB
3-55