Lexicon RV-5 User Manual page 171

Mode Adjust
RV-5
LISTENING MODE MENU OPTION and PARAMETER DESCRIPTIONS
(continued)
SURROUND MIX
-5 to +5dB
Controls the relative level of surround channel information sent to the
audio output connectors labeled Front L/R. It is recommended that
you set this parameter to +2dB or +3dB for all input sources. Available
in 5.1 2-CHANNEL and DTS (-ES) 2-CHAN modes.
TREB CUT RT
500Hz to 20kHz
Sets the frequency above which high frequencies are rolled off in
the reverberated signal, causing reverberated signals to grow
progressively darker. This results in a more natural sound because it
simulates the effect of air absorption in a real hall. Setting this
parameter to a low frequency dampens the audio as it re-circulates,
and consequently can actually shorten the reverb time. Available in
all LIVE! modes.
VOCAL ENHANCE
+6.0dB, +3.0dB, +0.0dB
Controls the level of dialog-boost in the audio output connector
labeled Center. Increase this setting to improve dialog intelligibility,
particularly at lower volume levels. Available in all Logic 7 modes.
6-37