I/O Config - Lexicon RV-5 User Manual

Setup

I/O CONFIG

SETUP I/O CONFIG
The I/O CONFIG option is used to configure the analog audio input connectors as eight (Left/Right) stereo connectors, five (Left/Right) stereo
connectors and one 5.1-channel configuration (Front L/R, Center, Subwoofer, Side L/R), or as two stereo connectors and two 5.1-channel
configurations.
8 STEREO INPUTS
SETUP I/O CONFIG ANALOG INPUTS
Select the 8 STEREO INPUTS option to configure the analog audio
input connectors as eight stereo connectors.
3-60
SETUP
MAIN MENU
INPUTS
MODE ADJUST
SPEAKERS
AUDIO CONTROLS
I/O CONFIG
TUNER PRESETS
DISPLAYS
SETUP
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
LIVE! CALIBRATION
POWER MANAGEMENT
8 STEREO INPUTS
I/O CONFIG REAR PANEL CONFIG
ANALOG INPUTS 8 STEREO INPUTS
AMP OUTPUTS OR
5 ST. & (1) 5.1 ANLG
OR
2 ST. & (2) 5.1 ANLG
When 8 STEREO INPUTS is selected:
• All analog audio input connectors are configured as stereo
connectors.
• The 5.1-channel connectors are not available.
• Input sources that were assigned to the 5.1 ANLG (3-5) and 5.1
ANLG (6-8) are reassigned to the stereo connectors labeled 3
and 6, respectively.
Lexicon