Lexicon RV-5 User Manual page 52

Setup
ASSIGNING AUDIO and VIDEO INPUT CONNECTORS
MAIN MENU
AUDIO CONTROLS
VIDEO CONTROLS
SETUP
ANALOG IN
SETUP INPUT ANLG AUDIO
Opens the ANLG AUDIO menu, which is used to assign an analog
audio input connector for the selected input. The RV-5 has eight
configurable inputs, each of which can be assigned to any of its eight
analog audio input connectors.
The appearance of the ANLG AUDIO menu depends on the configu-
ration of the analog audio input connectors.
• The ANALOG IN menu (A above) appears when the I/O CONFIG
menu 8 STEREO INPUTS option is selected (see page 3-60).
• The ANALOG IN menu (B above) appears when the I/O CONFIG
menu 5 ST. & 5.1 ANLG option is selected (see page 3-61).
• The ANALOG IN menu (C above) appears when the I/O
CONFIG menu 2 ST. & (2) 5.1 ANLG option is selected (see
page 3-61).
Please note the following:
• When no analog audio input connector is assigned, the RV-5
automatically sets the MAIN ADV menu INPUT SELECT
parameter to DIGITAL (see page 3-15).
3-8
SETUP INPUT SETUP: INPUT SETUP 1
DISPLAY SETUP
INPUT:
INPUTS
INPUT SETUP
NAME: ________
SPEAKERS
8-CH INPUT:
5.1+A/D
DIG AUDIO:
I/O CONFIG
SURROUND CONFIG
ANLG AUDIO:
DISPLAYS
DOLBY SURR SETUP
DIG/ANLG AUTO:
VOLUME CONTROLS
SPEAKER/EQ SETUP
A/D SAMPLE RATE:
TRIGGER
POWER ON SETTINGS
MODE FAMILY:
TUNER SETUP
MODE:
(continued)
DVD1 ANLG AUDIO
NONE
DVD 1
ANALOG-1
ANALOG-2
HDMI 2
ANALOG-3
NONE
ANALOG-4
ON
ANALOG-5
48kHz
ANALOG-6
STEREO
7.1 CHANNEL
2-CHANNEL
TUNER
• An analog audio input connector must be assigned when no
digital audio input connector is assigned. Refer to the previous
page for information about assigning a digital audio input
connector.
• The TUNER input corresponds with the internal AM/FM radio
tuner.
ANALOG-1 to 6, 7.1 CHANNEL, TUNER, NONE
Lexicon