Lexicon RV-5 User Manual page 95

RV-5
STEP DISTANCES
SET DISTANCES
AUTO DISTANCES
ORIGINAL DISTANCES
R SR RR
0.0ft 0.0ft
0.0ft
C
0.0ft
M
L SL RL
SUB
0.0ft 0.0ft 0.0ft 0.0ft
Use the SET DISTANCES menu to select
the desired speaker distances.
1 Press the arrow button to return to
the SET DISTANCES menu.
6
2 Press the or
gle between calibrated speaker distances
(AUTO) and original speaker distances.
The speaker graphics at the bottom of
the menu update to indicate the selected
values.
3 Press the
selected values. A confirmation message
is displayed to indicate the applied val-
ues.
4 Press the button twice in succession
to return to the SPEAKER SETUP menu.
The AUTO DISTANCES menu is only accessi-
ble after the DISTANCES & LEVELS calibra-
tion is performed as a combined procedure.
AUTO DISTANCES AUTO SPEAKER SETUP
FRONT LEFT 12.0ft DISTANCES
CENTER 10.5ft LEVELS
FRONT RIGHT 12.0ft
SIDE RIGHT 4.5ft AUTO VALUES APPLIED
REAR RIGHT ERROR
REAR LEFT 6.0ft
SIDE LEFT 4.5ft
SUBWOOFER N/A
Use the AUTO SPEAKER SETUP menu to
select speaker distances or levels.
1 Press the
2 To select the other calibration procedure,
arrow button to tog-
*
button to apply the
DISTANCES & LEVELS
AUTO DISTANCES*
OK FRONT LEFT
ERROR CENTER
FRONT RIGHT
SIDE RIGHT
PRESS TO VIEW
REAR RIGHT
DETAILS
REAR LEFT
SIDE LEFT
SUBWOOFER
arrow button to return to the
AUTO SPEAKER SETUP results screen.
follow the instructions in Step 5. Otherwise,
press the button to return to the
SPEAKER SETUP menu.
Note: The AUTO DISTANCES screen is shown
above as an example. The AUTO LEVELS
screen can be substituted.
LEVELS
SET LEVELS
12.0ft AUTO LEVELS
10.5ft ORIGINAL LEVELS
12.0ft
4.5ft
R SR RR
ERROR
0.0dB 0.0dB
0.0dB
6.0ft
C
4.5ft
0.0dB
N/A
M
L SL RL
SUB
0.0dB 0.0dB 0.0dB 0.0dB
Use the SET LEVELS menu to select the
desired speaker levels.
1 Press the arrow button to return to
the SET LEVELS menu.
• Press the and
toggle between calibrated output levels
(AUTO) and original output levels. The
speaker graphics at the bottom of the
menu update to indicate the selected
values.
• Press the arrow button to apply the
selected values. A confirmation message is
displayed to indicate the applied values.
• Press the arrow button twice in suc-
cession to return to the SPEAKER SETUP
menu.
The AUTO LEVELS menu is only accessible
after the DISTANCES & LEVELS calibration is
performed as a combined procedure.
Setup
AUTO LEVELS
FRONT LEFT -2.0dB
CENTER ERROR
FRONT RIGHT -2.0dB
SIDE RIGHT -4.5dB
REAR RIGHT -3.0dB
REAR LEFT -3.0dB
SIDE LEFT -4.5dB
SUBWOOFER N/A
arrow buttons to
3-51