Lexicon RV-5 User Manual page 137

RV-5
PREFERRED LISTENING MODE SELECTION
The INPUT SETUP menus include four preferred listening mode
selection parameters labeled 2-CH, DOLBY D, DTS(-ES), 5.1a and
MIC. These parameters are used to select a preferred listening mode
for 2-channel, Dolby Digital, DTS(-ES), 5.1a and LIVE! input sources.
The RV-5 automatically activates the selected listening mode
whenever a new input is selected or a new input source is present.
MODE AND BUTTONS
The front-panel and remote-control Mode arrow buttons can be
used to audition listening modes with the current Main Zone input
source. Pressing these buttons scrolls up ( ) or down ( ) through
listening modes available for the current Main Zone source.
Listening modes are scrolled in the order that appears in the MODE
ADJUST menu.
For example, if a 2-channel input source is present, press the
arrow buttons to scroll through available 2-channel listening
modes. The selected listening mode appears in the bottom-left
corner of the Main Zone two-line status.
Dynamic Listening Mode Selection
Dynamic listening modes are only available under certain condi-
tions. For example, many of the dynamic modes are only available
when the RV-5 is configured for seven main output channels and
source material with specific encoding is played. All dynamic
listening modes are available through the remote control or front
panel Mode button.
See "Dynamic Listening Modes" on page 3-13 for a complete
listing of dynamic listening modes.
LISTENING MODE SELECTION BUTTONS
The remote control listening mode selection buttons can be used
to activate the Logic 7 Film, Dolby, DTS(-ES), Logic 7 Music, or
Logic 7 TV listening mode that is appropriate for the Main Zone
input source. For instance, if the L7 button is pressed while a
2-channel source is present, the L7 FILM listening mode is
activated. The table below indicates the listening modes associated
with each mode family selection button.
2-Channel
Button
Sources
L7 F L7 FILM
L7 M L7 MUSIC
L7 TV
L7 TV
L7 MS L7 MUSIC
or SURROUND
DOLBY
DOLBY PLIIx MOV
DTS DTS NEO:6 CIN
* These listening mode names differ depending on the input source, the speaker config-
uration and certain parameter settings. For 5.1 systems with only side or rear speak-
ers (but not both), pressing the
** The "MODE SELECTION NOT AVAILABLE" message appears in the on-screen and
front-panel displays when no listening mode is available for the Main Zone input
source that is present.
*** For ES source.
Mode Adjust
Dolby Digital DTS(-ES)
Sources Sources
5.1 L7 FILM DTS(-ES) L7 FILM
5.1 L7 MUSIC DTS(-ES) L7 MUSIC
5.1 L7 TV MODE SELECTION
NOT AVAILABLE**
5.1 L7 MUSIC DTS(-ES) L7 MUSIC
DD 5.1 PLIIx MOV* MODE SELECTION
NOT AVAILABLE**
MODE SELECTION DTS(-ES)
NOT AVAILABLE**
button loads the DOLBY DIGITAL mode.
5.1a
Sources
5.1a L7 FILM
5.1a L7 MUSIC
N/A
N/A
N/A
N/A
6-3