Lexicon RV-5 User Manual page 120

Setup
TUNER SETUP
(continued)
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
DISPLAY
RDS NAME, PRESET NAME, FREQUENCY
SETUP TUNER SETUP DISPLAY
Identifies the current channel setting, in the top right corner of the
OSD and front panel display. There are three possible selections: RDS
NAME, PRESET NAME, and FREQUENCY. The default setting is RDS
NAME.
PRESET NAME displays the name given to the preset frequency of the
currently selected channel. If the current channel is not a tuner
preset, then the channel frequency will be displayed.
RDS NAME displays the station's Program Service (PS) name, which is
intended to be used to identify a station or station program. If the
RDS information is not available, then the channel frequency will be
displayed.
FREQUENCY displays the actual frequency value of the channel
selected.
3-76
TUNER SETUP
SETUP
REGION
INPUTS
SCAN SENS
SPEAKERS
AUTOLOAD
I/O CONFIG
CLEAR ALL
DISPLAYS
TUNER PRESETS
VOLUME CONTROLS
DISPLAY
TRIGGER
RADIO TEXT
TUNER SETUP
SCROLL RATE
LOCK OPTIONS
AUTO FREQUENCY
LIVE! CALIBRATION
POWER MANAGEMENT
Note:
In the US, some stations broadcast other information in place of the
Program Service (PS) name, such as a text messaging feature similar to
Radio Text (RT). This can make it difficult to identify the station. You may
wish to select PRESET NAME instead of an RSD NAME in this instance.
RDS NAME
PRESET NAME
USA
FREQUENCY
LOW
RDS NAME
ON
MEDIUM
ON
Lexicon