Landoll Brillion LSP5 Operator's Manual page 26

TABLE OF CONTENTS
Adjustment of Wheel Track
Remover
The depth of the wheel track removers can be adjusted as
shown. See Figure 3-10. Loosen the 1/2-13 x 1-1/4 bolts
and nuts that secure the clamps to the coil tine supports.
Adjust the supports up or down to the desired depth and
then retighten the nuts on the bolts. Do this for each pipe
and tine assembly.
Bolt,
1/2-13 x 1-1/4"
Locknut,1/2-13"
Figure 3-10: Wheel Track Remover
3-10 7K458-0221