Landoll Brillion LSP5 Operator's Manual page 12

Bolt,
5/16-18 x 3/4
Shafts Out
Right End
CAT2 Quick Coupler Hitch
Adaptor Kit - Optional
1. Remove Seeder Lower Hitch Pins.
2. Attach the Hitch Lugs to the front of the Seeder Frame
tube and position the Hitch Lugs 6" outward from each
Seeder Frame Lug. See Figure 2-4 and 2-5. Insert
the Clamp Plate into the Hitch Lug and over the top of
the Seeder Frame tube. Secure with 1/2-13 x 4-1/2
Bolts and Locknuts.
3. Insert Lower 3-Pt Pin into the Lower Hitch Lugs.
Secure with existing Klik Pins.
4. Remove Upper Hitch 3/4 x 3 Clevis Pin,1 x 2 Sleeve
and Hair Pin Cotter. Place 1-1/4 x 1-15/16 Sleeve
over removed 1 x 2 Sleeve and place it between the
Upper Lugs bottom hole. Re-insert 3/4 x 3 Clevis Pin
and Secure with Hair Pin Cotter
2-2
TABLE OF CONTENTS
REAR
Bushing
Washer
Blade
Agitator
Box End Bearing
Figure 2-3: Agitator Blades Installation
Intermediate
Bearing
Cage Agitator
Brush Agitator
FRONT
7K458-0221